Hyundai Elantra: Radiator Grill Repair procedures - Front Bumper - Body (Interior and Exterior)Hyundai Elantra: Radiator Grill Repair procedures

Replacement
   
Put on gloves to prevent hand injuries.
   
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Use a plastic panel removal tool to remove interior trim pieces without marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the front bumper cover.
(Refer to Front Bumper - "Front Bumper Cover")
2.
Separate the front bumper wiring (A).

3.
Remove the fixing clip and then the front bumper energy absorber (A).

4.
Using a screwdriver or remover, remove the radiator grill cover (A).

5.
Loosen the radiator grill mounting screws.
6.
Using a screwdriver or remover, pull the clip upward and remove the radiator grill (A).

7.
To intall, reverse the removal procedure.
   
Replace any damaged clips (or pin-type retainers).
    Radiator Grill Components and Components Location
    Component Location 1. Radiator grill ...